Therma-Stor
HEAT RECOVERY SYSTEM
Capture waste heat energy from your refrigeration system to provide hot water while allowing your compressor to run more efficiently. Heat recovery system is a double-walled heat exchanger with water storage tank that captures lost heat from your cooling system to heat your water for free. The heated water is then stored in the system until it is needed. The Therma-Stor Heat Recovery System is recognized as the innovative leader in heat recovery technology.
How Our System Works
A Therma-Stor Heat Recovery System recovers wasted energy and converts it to free hot water.
A typical cooling system removes heat from the area that needs to be cooled. Without a Therma-Stor Heat Recovery System, this removed heat, or energy, is just dissipated to the surrounding area or exhausted. It is wasted.
The Therma-Stor system uses this “waste” energy to heat water. The result is free hot water that can be used for dish washers, laundry facilities, cleaning, and more.
What Is Heat Recovery?
1: Maximum Heat Transfer
The Therma-Stor “hot plate” heat exchanger provides the maximum heat transfer surface area while minimizing the refrigerant pressure drop.
2: Quick Recovery
The “stratified” tank, with the hottest water near the top, allows for quick recovery and efficient heat transfer. This maximizes the availability of the hot water. Therma-Stor tanks also operate at low temperatures, maximizing efficiency and preventing scaling.
- SIMPLE OPERATION Therma-Stor tanks have no motors or pumps, making them extremely easy to operate and maintain. Optional auxiliary electric resistance backup is also available.
- COMPRESSOR PROTECTION Therma-Stor tanks extend the life of cooling units, due to the fact that compressors don’t need to work as hard to remove heat. As a result, compressors and condenser fans don’t need to run as often.
- COMPACT EFFICIENCY
The entire system occupies minimal space; it heats and stores the water in a single unit.
3: Long Life
The industrial glass-lined water storage tank resists corrosion. It also has two replaceable anodes for extra protection. Plus, Therma-Stor tanks come with a full five-year warranty on the heat exchanger and water tank.
4: Certifications and Approvals
Therma-Stor hot water tanks are thoroughly tested and listed by Underwriter’s Laboratories, Inc (UL). They meet all codes required for double-wall vented heat exchangers. CSA approved units are available. Foam-in-place 2″ insulation (R16) meets ASHRAE 90 standards.
- FLEXIBILITY Therma-Stor units fit any refrigeration system. They can accommodate compressor systems from ½ hp to 100 hp or more. Multiple units can be piped together to match refrigeration capacity and hot water demand.
- ENERGY AND COST EFFICIENCY By expanding the condensing surface of a cooling system, Therma-Stor tanks improve the efficiency of both air-cooled and water-cooled condensers. A Therma-Stor unit connected to an air-cooled condenser reduces heat, which maximizes compressor efficiency. A water cooled-condenser connected to a Therma-Stor tank requires less cooling water. In either case, this means double savings: reduced water or electricity costs — and free hot water.
