Completely air-powered heavy-duty crowd gate. The BouMatic® Air-Trac® Crowd Gate allows customized on-site fabrication for holding pen widths up to a maximum of 36 feet (11 m).
Included In Kit: Pre-fabricated carriages (2), Air motor drive unit (1), Gate side assemblies (2), Gate Intermediate pipes (5), Control box, air fittings, packed parts, Crowd gate coupling kits (3), Bearing kits (3), and 5 inch Air Cylinders (2).
The BouMatic® Air-Trac® Crowd Gate allows customized on-site fabrication for holding pen widths up to a maximum of 36 feet (11 m).
A 1.25 inch OD x 12 feet cold drawn steel bar serves as the drive shaft for the AirTrac® crowd gate. Order quantity required to span the width of the crowd gate.
Coupling assembly to join two lengths of drive shaft together. Order if more than two 12 feet sections of drive shaft (PN 8516271) are required. (Three Coupling Kits are included in the Crowd Gate Kit.)
3 Inch x 6 Inch x 20 Foot. Order the quantity necessary to span the width of the crowd gate (buttweld beams together and cut to the required dimension).
Order the number of 200 foot lengths necessary to provide three air lines from the air control valve in the equipment room to the air motor assembly on the crowd gate (with gate parked at the rear of the holding pen).
Air hose for the crowd gate control circuit. Order 4x the distance from the control valve assembly in the equipment room to the crowd gate control box. Order additional hose if a remote control box will be used. Different colored hose and 500 foot rolls are available.
C-2060H Pitch 1.5 inch (3.8 cm), double-pitch. For all installations. Length required = 2x length of holding pen + 10 feet (305 cm). Sold in 10-foot section.