Xpedia 360EX

ADVANTAGES AT A GLANCE

• Easy and Fluid Cow Traffic

  Cows enter calmly, quickly and in sequence thanks to:

  • The Texas one-way-entry gates
  • The positioning of the cows, at the opposite of the entrance

  • The automated entry management: the rotary stops in case there is no cow at the entrance.

• Calm and comfortable cows

  Individual restraint separating the cows from each other during milking.

• Designed for the Milker’s Comfort

  Ergonomic operator positioning for enhanced comfort throughout all procedures, thanks to:

  • An inwards sloping platform, also ensuring a clean working environment
  • An udder within easy reach, the milker stands in an ergonomically good straight position
  • The single control button within easy reach, at arm height
• Ultimate Udder Access
  • Milking from the rear in a 90 degree position with perfect milking cluster positioning. The milker and cow are close to each other.
  • Stall with 2 rear rails in a 13° offset, placing the cow and her udder in an optimal milking position.
  • Optimum, well-balanced cluster positioning without special devices.
• Limitless performance

  This rotary can be equipped with 24 to 40 stalls and can milk 120 to 300 cows an hour. You can gain 2 minutes per rotary turn and increase from 24 to 40 cows more per hour.

• Smart & efficient
  • Touchscreen within easy reach for complete platform and milking routine management. You can easily set and manage your own working speed.
  • Smart speed control: smart automatic speed slowing system. The rotary system slows down when a cow has not yet been finished.
  • The second turn option allows you to customize your milking routines when needed.
• Uncluttered Design

  Simplistic design with completely integrated automation. The wash jetters are stowed in the console resulting into a clear and clean working environment.

• Reliable and robust

  Reliable, maintenance-free system designed to last. The track has 2.2 Teflon rollers per stall, which is , based on 24/7 rotaries’ design. The load capacity is 30% higher than traditional platforms and the drive system has a low electric consumption (0.75kW).

• Safe milking
  • The Xpedia 360EX has a safety switch the whole way round the rotary system, enabling the operator to stop and start the platform from any position.
  • Smart Security System: automatic stop and reverse device. If a cow enters too slow or hesitates, the system stops, reverses and restarts automatically.
  • Stall with 2 rear rails in a 13°offset, protecting the milker against back kicking.
• Second turn-systeem beschikbaar

  Het zogeheten second turn- of 'tweede omloop'-systeem van BouMatic werkt erg eenvoudig. Als u dat wil, kan u een koe in de draaimelkstal laten staan. Met een specifiek daartoe voorziene verdeler laat u een stang achteraan de melkstand uitschuiven waardoor de koe wordt vastgehouden. Deze second turn kan automatisch worden ingesteld als de SmartDairy-controller geen melk detecteert of er nog een melkbeurt aan de gang is, of handmatig als de melker een koe wil terugzien voor een interventie.
  BouMatics second turn-systeem bestaat uit een eenvoudig ontwerp (weinig bewegende onderdelen) dat uiterst duurzaam is en maar weinig onderhoud vereist.
  
  Dit systeem kan bovendien zowel op nieuwe als op reeds bestaande apparatuur geïnstalleerd worden.