Skraber

Designed for the management of slurry effluents in dairy cattle buildingsTechnology based on Scorpion scraper experience, the historical reference on the French market

Ideal for small buildings – up to 150 metersFor buildings with 1 or 2 corridorsFor corridors from 2.5 to 5m wide For all floor types (concrete, mats, rubber, asphalt)Drive can be mounted inside or outsideAvailable models: Delta scraper, Straight scraper, V-scraper

• For bedding with or without straw
• Two operating directions for each corridor
• Standard: frost protection system to prevent blockage by ice
• Rubber band for irregular masonry levels and a very liquid manure

• Robust drive with non-deformable drums (10 mm of thickness)
• The anti-twist rope is wound regularly
• Synthetic rope 10 and 12 mm, resistance up to 17 tons

• Easy to install
• Fully automatic scraping system
• Automatic start clock
• Simple control system - can be programmed up to 24 times a day
• Low-maintenance - sealed-bearing pulley without lubricator
• Intelligent controller: maintenance warnings

Limited energy consumption - 0.55 KW

• Overcurrent protection system
• Overload protection system
• Optional: Encoder on the motor to locate the scraper on its path
• Rubber band standard

Limited energy consumption - 1,5 KW

• For slurry and straw manure management
• 4 models available:
  • V scraper
  • V scraper with blocking
  • Straight scraper
  • Delta scraper
    

• For corridors of various dimensions
• 22 T chain

• Built-in VARIO system
• Soft start
• Slow discharge
• Slows down in the sensitive areas of the building
• Intelligent controller: maintenance warnings

• Low-maintenance with sealed-bearing pulley without lubricator
• Automatic tension with a chain that is always correctly tensioned without manual intervention

• Overcurrent protection system
• Overload protection system
• Rubber band standard

• Ideal for solid manure recovery
• 1 to 6 scrapings a day in the presence of the operator
• Intelligent controller : maintenance warning

• Hoof protection
• Possibility to offset the rail (by 25 cm) in the corridor, to allow the cows to keep their hind legs on a flat surface, even at the headlocks!

• 25 years of experience in scraping systems
• UPN rail with external stops ensuring total security for claws
• Simple and robust inversion system
• Arms weighed down with concrete for permanent contact with the ground
• Specially designed drive bars allow evacuation by tractor even on the rail

• Rail system without length restriction
• Up to 6m wide over 200m
• More than 4.5 tons of thrust
• Control cabinet ACL 8000 with anti-freeze system
• Functional in extreme conditions
• Adjustable extension wing to center the load up to 25cm
• Cylinder with push or pull positioning

• Mono or multi-corridor hydraulic unit
• Hydraulic unit equipped with a large reserve of 80 liters of oil
• Heavy design (400kg/m)
• Hydraulic cylinder designed for 11 tons of thrust

• Reduced maintenance
• Reversed UPN guide bar embedded in concrete to preserve the concrete
• Long-term investment
• Stainless steel screws to prevent rust

• V scraper:
  • Suitable for highly unbalanced loads
  • Specially designed for corridors (headlocks, straw cubicles)
  • Parking area 1.5 times scraper width
  • Refinement and load distribution across the width
  • Design without sharp corners
  • Optional: blocking of arms
  • Arms can be weighed down
  • Polyamide guidewheel with large adjustment range

• Heavy straight scraper:
  • Designed with a recentering angle
  • Load correctly distributed across the width
  • Adjustment of the inclination and opening of the wings
  • 30 cm wide beam can be weighed down
  • Rubber blades standard for more precise scraping and better cleaning of concrete

• Automatic operation with a programmable cycle
• Maintenance-free pulleys without lubricator
• Automatic chain tension
• Design without sharp corners (wings, carriage, arms, …)
• Intelligent controller: maintenance warnings

• Built-in VARIO system
• Soft start
• Slow discharge
• Slows down in the sensitive areas of the building
• Automatic tension with a chain that is always correctly tensioned without manual intervention

• Massive chain
• 20 tons breaking load
• Direct drive with oil bath gearbox
• Scraper with heavy design
• Moulded flat bottom chain

• Automatic operation possible
• Built-in VARIO system
• Clutch release system for uneven corridors

• V scraper:
  • Offset load
  • 1.5 times width required for parking
  • Adjustable polyamide guidewheel
  • New axle locking system
  • Wound-limiting carriage shape
  • Arms can be weighed down
  • Optional: Blocking of arms

• Straight scraper:
  • Balanced load
  • Compact height-adjustable central beam
  • Protection of hooves
  • Blocking of wings
  • Wound-limiting carriage shape
  • Rubber blades standard for more precise cleaning